Why wont my slide out go in?
Hydraulic Slide Outs Check the hydraulic lines for leaks, and check the pressure of the pump to make sure it has enough pressure to work the slides. Make sure the hydraulic valve isn’t bad, which could prevent fluid from getting where it needs to go. Check the hydraulic pump too.
What to do when slide outs don’t move?
Make sure the house batteries are charged completely, or if at all possible, plug your RV into shore power. This will indicate whether the problem may be the batteries or not. If you push the button for the slide outs and can hear the motor running but the slides don’t move, check the motor’s shear pins.
What causes the slide out on a camper to bind?
Also, if your chassis is bent, that will cause your camper slide out to bind. On top of that, check the openings your slide out is going through. There may be a problem there. Check to see if you have a manual over ride option you can use just in case.
Is there an electrical problem with the slide out?
Finding an apparent electrical button, the control panel was removed and the wires for the stuck slide were placed on another slide “in/out” button. Again, there was no power to the stuck slide when the “In” was pushed. The two young mobile repair techs were now perplexed and did not have the skill to trouble-shoot the electrical issue.
Are there any problems with the slide out on an RV?
Troubleshooting RV Slide Out Problems: One main problem with slide outs is that they may get out of alignment. The good news here is that each slide can be adjusted separately. All you have to do to fix it is take your RV to a dealer and let them make an adjustment.
Why is my drivers side slide out on my Bounder 35R?
I just bought a 2004 Bounder 35R. When I got it the drivers side slide went out and wouldn’t go back in. The dealer said a “shear pin” was broken and the other one was coming loose. They replaced both and lubricated the slide.
Make sure the house batteries are charged completely, or if at all possible, plug your RV into shore power. This will indicate whether the problem may be the batteries or not. If you push the button for the slide outs and can hear the motor running but the slides don’t move, check the motor’s shear pins.
Troubleshooting RV Slide Out Problems: One main problem with slide outs is that they may get out of alignment. The good news here is that each slide can be adjusted separately. All you have to do to fix it is take your RV to a dealer and let them make an adjustment.
What’s the best way to retract slideouts?
Every seminar I have attended says to always operate the slides at road level, which means to put them out before leveling the coach and bring them in after raising the jacks. This sets the coach “true” so the slides are not “torqued”, which can cause binding and damage.
